17
Changing the tray settings
When you change the paper in a tray, the tray settings in the system settings must also be changed.
1 Press the [SYSTEM SETTINGS] key.
2 Configure the tray settings in the
touch panel.
Some of the settings only appear when you
have administrator rights.
(1) Touch the [Paper Tray Settings]
key.
(2) Touch the [Tray Settings] key.
(3) Touch the [Tray 1] key.
(4) Touch the [Recycled] key.
(5) Touch the key of desired paper size.
For more information, see "Paper Tray
Settings" in "7. SYSTEM SETTINGS" in
the Operation Guide.
(6) Touch the [OK] key.
The above steps change the paper
settings for tray 1 to A4(8-1/2" x 11")
recycled paper.
SYSTEM
SETTING
System Settings
Total Count
Paper Tray
Settings
Printer Condition
Settings
Default Settings
Address Control
Document Filing
Control
Fax Data
Receive/Forward
List Print
(User)
USB-Device Check
Exit
System Settings
Paper Tray Settings
Auto Tray Switching
Tray Settings
Paper Type Registration
OK
System Settings
Paper Tray Settings
Tray 1
Print Copy Fax
I-Fax
Doc.
Filing
Type / Size
Plain / B4
OK
1/6
Fixed Paper Side
Disable Duplex
Disable Staple
Disable Punch
System Settings
Tray 1 Type/Size Setting
Type Size
Recycled
OKType
1/3
2/2
A3
System Settings
Tray 1 Type/Size Setting
Select the paper type.
Plain
Pre-Printed
Recycled
Letter Head
Pre-Punched
Colour
Cancel
1/2
1/2
A5R
B5R 216x330(8 x13)
A4
A4R
B4
B5
Admin Password
1
/
2
(1)
(2)
(3)
(6)
(4)
(5)
mx2301_ex_qck.book 17 ページ ２００９年８月７日 金曜日 午後４時６分
To Next Page
Loading...
