31
INTERRUPTING A COPY RUN
(Interrupt Copy)
When the machine is printing, you can temporarily interrupt the job and
perform a copy job that you wish to prioritize.
This feature is useful when you need to make an urgent copy during a
long copy run.
1 Touch the [Interrupt] key while the
machine is printing.
The [Interrupt] key appears in the base screen
while the machine is printing.
2 Place the originals.
When using the document glass, place the
original with the side to be scanned face down.
3 Set the number of copies and then
press the [COLOUR START] key or
the [BLACK & WHITE START] key.
The interrupted copy job will resume when the
copy job is finished.
Printing
Interrupt
Original
Copies in progress from tray 1.
Ready to scan for next copy job.
2-Sided Copy
5
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
2.
3.
4.
1.
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
Interrupt
A4R
B4
A3
A4
A4
Plain
The side to be scanned must be face up!
Cancel copying
Correct sets
mx2301_ex_qck.book 31 ページ ２００９年８月７日 金曜日 午後４時６分
To Next Page
Loading...
