26
SELECTING THE EXPOSURE AND IMAGE
TYPE
You can specify the original image type to obtain a clearer copy.
The example of copying an original with light colours such as pencil
writing is explained below.
1 Place the originals.
When using the document glass, place the
original with the side to be scanned face down.
2 Select exposure settings in the touch
panel.
(1) Touch the [Exposure] key.
(2) Use the keys to switch through
the screens.
(3) Touch the [Light Original] key.
(4) Darken the exposure with the
key.
Nine levels are available for the exposure.
Darken the exposure with the key,
and lighten the exposure with the key.
(5) Touch the [OK] key.
3 Set the number of copies and then
press the [COLOUR START] key or
the [BLACK & WHITE START] key.
Light original
Exposure adjustment
The side to be scanned must be face up!
Ready to scan for copy.
2-Sided Copy
Original
0
Output
Special Modes
File
Quick File
Full Colour
Colour Mode
2.
3.
4.
1.
Auto
Exposure
100%
Copy Ratio
Job Detail
Settings
Exposure
OK
1/2
Text
Auto
Photo
Printed
Photo
Text/Photo
Text/
Prtd.Photo
Manual
Exposure
OK
2/2
Light
Original
Map
Scan
Resolution
Manual
A4
A3
A4
B4
A4R
A4
Plain
Manual
531
531
(1)
(2)
(3)
(5)
(4)
Correct sets
mx2301_ex_qck.book 26 ページ ２００９年８月７日 金曜日 午後４時６分
To Next Page
Loading...
