Sharp MX-2600N Safety Guide

13
SPECIFICATIONS
Finisher specifications
*1 The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of
paper, and the storage conditions of the paper.
*2 Up to 10 envelopes can be output.
*3 The height of the sheets must not exceed 71 mm (2-51/64").
*4 The height of the sheets must not exceed 35.5 mm (1-13/32").
*5 The maximum number of sheets for stapling assumes a paper weight of 90 g/m
2
(24 lbs.) and includes two cover sheets of
106 g/m
2
to 256 g/m
2
(28 lbs. bond to 140 lbs. index).
Model
MX-FNX9
Paper sizes
A3W, A3, B4, A4, A4R, B5, B5R, A5R, envelopes, 12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2"R, 8K, 16K, 16KR
Paper weight
Thin paper (55 g /m
2
to 59 g /m
2
(15 lbs. to 16 lbs.)) plain paper (60 g /m
2
to 105 g /m
2
(16 lbs. to 28 lbs.))
heavy paper (106
g /m
2
to 256 g /m
2
(28 lbs. bond to 140 lbs. index)) , envelopes (75 g /m
2
to 90 g /m
2
(20 lbs. to 24 lbs.))
Modes
Non-staple, staple
Allowed paper sizes for
offset
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K
Offset distance
30 mm (1-3/16")
Tray capacity*
1
Non-stapling*
2
:
500 sheets*
3
(A4, A4R, B5, B5R, A5R,
8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2"R, 16K, 16KR)
250 sheets*
4
(A3W, A3, B4, 12" x 18", 11" x 17",
8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8K)
Stapling*
5
:
30 sets or 500 sheets*
3
(A4, A4R, B5,
8-1/2" x 11", 8-1/2" x 11"R, 16K, 16KR)
30 sets or 250 sheets*
4
(A3, B4, 11" x 17",
8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8K)
Power supply
Supplied from the machine
Dimensions
440 mm (W) x 595 mm (D) x 205 mm (H) (17-21/64" (W) x 23-27/64" (D) x 8-5/64" (H))
(When tray is folded up)
Weight
Approx. 13 kg (28.7 lbs.)
Overall dimensions when
attached to machine
1060 mm (W) x 670 mm (D) (41-23/32" (W) x 26-3/8" (D)) (When tray is extended)
Stapler section
Allowed paper sizes for
stapling
A3, B4, A4, A4R, B5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K, 16KR
(Three stapling positions: one staple at bottom left corner, one staple at top left corner, and two
staples.)
Maximum number of
sheets for stapling*
5
50 sheets (A4, A4R, B5, 8-1/2" x 11", 8-1/2" x 11"R, 16K, 16KR)
30 sheets (A3, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8K)
(30 sheets when the sheets are the same width but different lengths.)
Note:
Special media such as transparency film and label sheets cannot be stapled or punched.

Sharp MX-2600N Specifications

Power

power requirements	230 ~240V AC, 50/60 Hz
power consumption	1.84 kW
warm-up time	Less than 60 sec.

System Memory

copier memory	Standard 1, 024MB, max. 2, 048MB
printer memory	Standard 512MB, max. 1, 536MB
HDD	80GB

Paper Handling

standard paper capacity	1, 100 sheets
maximum paper capacity	5, 600 sheets
paper weight (tray)	60 g/m² to 209 g/m²

Weight and Dimensions

dimensions	620 x 695 x 950 mm
weight	Approx. 112 kg