Sharp MX-4100N - Page 171

MX-5001N SIMULATION 6 – 24
22-6
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to output the setting/adjustment data
(simulation, FAX soft switch, counter), the
firmware version, and the counter list.
Section
Operation/Procedure
* When installing or servicing, this simulation is executed to print
the adjustment data and set data for use in the next servicing.
(Memory trouble, PWB replacement, etc.)
1) Select the print list mode with 10-key.
2) Press [EXECUTE] key to start printing the list selected in step
1) .
22-8
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the number of operations
(counter value) of the finisher, the RSPF,
and the scan (reading) unit.
Section
Operation/Procedure
The counter values of the finisher, the RSPF, and the scanner
related counters are displayed.
22-9
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the number of use (print
quantity) of each paper feed section.
Section
Paper feed, ADU, LCC
Operation/Procedure
The counter values related to paper feed are displayed.
22-10
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the system configuration
(option, internal hardware).
Section
Operation/Procedure
The system configuration is displayed.
(The model names of the installed devices and options are dis-
played.)
Item/Display
Print list
mode
Print content
A DATA PATTERN 1 Firmware version,
counter data, etc.
2 SIM50-24 data
3 Data related to the process control
SPF Document feed quantity
SCAN Number of times of scan
STAPLER Staple counter
PUNCHER Puncher counter
STAMP Stamp counter
SADDLE STAPLER Saddle staple counter
SADDLE V FOLD Saddle finisher V fold counter
COVER Cover open/close counter
HP_ON Number of scanner HP detection
OC LAMP TIME Total lighting time of the lamp in OC section
(* hour * minutes)
DSPF LAMP TIME Total lighting time of the lamp in DSPF section
(* hour * minutes)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
'$7$35,1702'(



$˖
˷ ˹
˖'$7$3$77(51
$˖
2.
(;(&87(
TRAY1 Tray 1 paper feed counter
TRAY2 Tray 2 paper feed counter
TRAY3 Tray 3 paper feed counter
TRAY4 Tray 4 paper feed counter
MFT TOTAL Manual paper feed counter (Total)
MFT HEAVY Manual paper feed counter (Heavy paper)
MFT OHP Manual paper feed counter (OHP)
MFT ENV Manual paper feed counter (Envelope)
LCC Side LCC paper feed counter (A4 LCC)
ADU ADU paper feed counter
(Paper reverse section)
MACHINE MX-4100N Main unit
MX-5000N
MX-4101N
MX-5001N
SPF MX-RPX2
STANDARD
Automatic document
feeder
STAMP AR-SU1 Finish stamp
DESK MX-DEX8 Desk unit
MX-DEX9
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
25*67$3/(&2817(5',63/$<



63)
6&$1
67$3/(5
381&+(5
67$03
6$''/(67$3/(5
6$''/(9)2/'
&29(5
+3B21
2&/$037,0(
'63)/$037,0(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
3$3(5)(('&2817(5',63/$<



75$<
75$<
75$<
75$<
0)7727$/
0)7+($9<
0)72+3
0)7(19
/&&
$'8