Sharp MX-4100N - Page 182

MX-5001N SIMULATION 6 – 35
26-38
Purpose
Setting
Function (Purpose)
Used to set Continue/Stop of print when the
maintenance life is reached.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
26-41
Purpose
Setting
Function (Purpose)
Used to set Enable/Disable of the magnifi-
cation ratio automatic select function (AMS)
in the center binding mode.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
<Default value of each destination>
26-49
Purpose
Setting
Function (Purpose)
Used to set the print speed of postcards
mode.
Section
Operation/Procedure
Select the copy speed mode with the touch panel. (Default: LOW)
26-50
Purpose
Setting
Function (Purpose)
Used to set functions.
Section
Operation/Procedure
1) Select a target item of setting with [↑] [↓] key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
(*1) Default values for each destination of item A/B/D
Item/Display Content
Default
value
A MAINTENANCE
LIFE OVER
0 Print continue 0
1 Print stop
B FUSER WEB END
(0: CONTINUE
1: STOP)
0 Continue/Stop setting of print
when the fusing web is end
(Print Continue)
0
1 Continue/Stop setting of print
when the fusing web is end
(Print Stop)
0 AMS Disable
1AMS Enable
U.S.A 0 (Disable) EUROPE 1 (Enable)
CANADA 0 (Disable) U.K. 1 (Enable)
INCH 0 (Disable) AUS. 0 (Disable)
JAPAN 0 (Disable) AB_A 0 (Disable)
AB_B 0 (Disable) CHINA 0 (Disable)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
(1*,1(/,)(29(56(77,1*



$˖
˷ ˹
˖0$,17(1$1&(/,)(29(5&217,18(6723
$˖
˖)86(5:(%(1'˖&217,18(˖6723
%˖
2.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
3$03+/(702'($066(77,1*



$˖
˷˹
˖<(612
$˖
2.
Item/Display Content
Default
value
A BW REVERSE 0 BW reverse copy Disable Refer
to *1
1 BW reverse copy Enable
B COLOR MODE 2-color/Single color copy mode
Enable/Disable setting
Refer
to *1/*2
C FINISHER
FUNCTION
0 Finisher special paper
The number of paper exit is
limited.
0
Refer
to *3
1 Finisher special paper
The number of paper exit is
not limited.
D COLOR MODE
(PRINTER)
0 All colors and monochrome
counters are displayed.
Refer
to *1
1 All are displayed except for
the 3-color print counter.
2 Monochrome and full color
print counters are displayed.
EFEED TRAY
COLOR
0 Paper feed tray color display
ON during paper feed
0
1 Paper feed tray color display
OFF during paper feed
Destination Item A Item B Item D
U S A 1 0 2
CANADA 1 0 2
INCH 1 0 2
JAPAN 1 7 2
AB_B 1 0 2
EUROPE 1 0 2
U K 0 0 2
AUS 1 0 2
AB_A 1 0 2
CHINA 1 0 2
ǂǂǂ6,08/$7,21
ǂǂ12
&/26(
7(67
&23<63(('02'(6(783





/2: +,*+
3267&$5' ˖