Sharp MX-4100N - Page 188

MX-5001N SIMULATION 6 – 41
27-6
Purpose
Setting
Function (Purpose)
Used to set of the manual service call.
(FSS function)
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
27-7
Purpose
Setting
Function (Purpose)
Used to set of the enable, alert callout.
(FSS function)
Section
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
*1 The FSS function setting can be changed only from Disable to
Enable. (Cannot be changed from Enable to Disable.)
*2 Alert send timing
27-9
Purpose
Setting
Function (Purpose)
Used to set the paper transport time record-
ing YES/NO threshold value and shading
gain adjustment retry number.
(FSS function)
Section
Operation/Procedure
1) Select an item to be set with [↑] [↓] keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
* Items A, B: 0%, standard passing time between sheets of paper;
100%, time for judgment as a jam between sheets of paper.
* Item C: Because of a trouble in shading operation, the number of
retry is actually not registered.
0 Allow (Default)
1 Inhibit
A FSS
FUNCTION
0 FSS function enable
1 FSS function disable (*1) (Default)
B ALERT 0 Alert call enable (*2) (Default)
1 Alert call disable
No alert cause Initial state / Trouble / Continuous JAM alert
Maintenance When the maintenance timing is reached.
Service call When pressing Service call.
Toner send request When the toner order automatic send setting is
reached.
Toner collection request Revision of the toner installation date (only for
a new product)
Alert resend
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
0$18$/6(59,&(&$//6(783



$˖
˷˹
˖<(612
$˖
2.
A FEED TIME 1 0 -
100
Threshold value of the paper
transport time between sensors
(Main unit) (50: Default)
B FEED TIME 2 0 -
100
Threshold value of the paper
transport time between sensors
(RSPF) (50: Default)
CGAIN
ADJUSTMENT
RETRY
0 - 20 Threshold value of the gain
adjustment retry number
(11: Default)
D JAM ALERT 1 -
100
Alert judgment threshold value
for occurrence of continuous
jams
Alert judgment threshold value
for occurrence of continuous
jams (Setting of the number of
times of continuous jams as the
alert for continuous jams)
(Default: 10 times)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)66)81&7,216(783)81&7,21



$˖
˷ ˹
˖)81&7,21<(612
$˖
˖$/(57<(612
%˖
2.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)66)81&7,21$'-8670(17



$˖
˷˹
˖)(('7,0(
$˖
˖)(('7,0(
%˖
˖*$,1$'-8670(175(75<
&˖
˖-$0$/(57
'˖
2.