Sharp MX-4100N - Page 265

MX-5001N SIMULATION 6 – 118
55
55-1
Purpose
(Do not use this function unless specially
required.)
Function (Purpose)
Used to set the specifications of the engine
control operations. (SOFT SW)
Section
Operation/Procedure
55-2
Purpose
(Do not use this function unless specially
required.)
Function (Purpose)
Used to set the specifications of the scan-
ner control operation. (SOFT SW)
Section
Operation/Procedure
55-3
Purpose
(Do not use this function unless specially
required.)
Function (Purpose)
Used to set the specifications of the control-
ler operation. (SOFT SW)
Section
Operation/Procedure
56
56-1
Purpose
Backup
Function (Purpose)
Used to transport data between HDD - MFP
PWB SRAM/EEPROM. (Used to repair the
PWB.)
Section
Operation/Procedure
1) Select a target content of data transfer.
2) Press [EXECUTE] key and press [YES] key.
Data transfer of the item selected in procedure 1) is executed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
56-2
Purpose
Data backup
Function (Purpose)
Used to backup the data in the EEPROM.
SRAM, and HDD (including user authenti-
cation data and address data) to the USB
memory. (Corresponding to the device
cloning and the storage backup.)
Section
Operation/Procedure
1) Insert the USB memory into the main unit.
2) Select a target transfer item with the touch panel.
<IMPORT>
From USB MEMORY DEVICE To EEPROM, SRAM, HDD
<EXPORT>
From EEPROM, ESRAM, HDD To USB MEMORY
3) Press [EXECUTE] key, and press [YES] key.
Data transfer selected in the procedure 2) is performed
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
ǂǂǂ6,08/$7,21
ǂǂ12
&/26(
7(67
(1*,1(62)76:6(77,1*


(;(&87(
6:1R
'$7$
䋺
䋺
6:1R

ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6&$11(562)76:6(77,1*


(;(&87(
6:1R
'$7$
䋺
䋺
6:1R

ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
0)362)76:6(77,1*


(;(&87(
6:1R
'$7$
䋺
䋺
6:1R

ALL → HDD All the memory contents are transferred to the HDD.
HDD → ALL The HDD contents are transferred to all the
memories.
EEPROM → HDD Transfer from EEPROM to HDD
HDD → EEPROM Transfer from HDD to EEPROM
SRAM → HDD Data transfer from SRAM to HDD.
(Including the FAX memory)
When the FAX memory or an option memory
(memory for FAX) is installed, the contents in the
memory for FAX are also transferred to HDD.
HDD → SRAM Transfer from HDD to SRAM
(including the FAX memory)
When the FAX memory or an option memory
(memory for FAX) is installed, the contents of the
FAX memory are also transferred to HDD.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
&23<'$7$





$//ė+''
˖(1$%/(
+''ė$//
˖',6$%/(
((3520ė+''
˖',6$%/(
+''ė((3520
˖',6$%/(
65$0ė+''
˖',6$%/(
+''ė65$0
˖',6$%/(
$5(<28685("
<(6 12 (;(&87(