Sharp MX-4500N - Page 374

MX3500N DUPLEX SECTION G – 3
(1) Right door unit
1) Open the right door unit.
2) Remove the right door unit.
a. RD I/F PWB
1) Open the right door unit.
2) Remove the connector cover, and remove the ADU inner
cover.
3) Disconnect the connector, and remove the RD I/F PWB.
b. Manual paper feed clutch
1) Open the right door unit.
2) Remove the connector cover ADU inner cover.
3) Remove the ADU cabinet R.
4) Remove the MF drive connection plate. Disconnect the con-
nector, then remove the manual paper feed clutch unit.
5) Remove the manual paper feed clutch.
c. Discharge brush
d. Detects the right tray paper exit full.
e. Right tray paper exit detection
1) Open the right door unit.
2) Remove the connector cover.
1
2