22
BEFORE USING THE MACHINE
Large capacity tray (MX-LCX3 N)
1
Press the operation button.
The operation button blinks, and the tray paper table goes
down to the paper loading position. Wait until the operation
button light goes off.
Do not pull out the tray until the light goes off. If you pull out the tray forcibly while the button lights up or blinks, a
machine failure may be resulted.
2
Pull out the paper tray.
Gently pull the tray out until it stops.
3
Fan the paper.
Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.
4
Place the paper in the center of the
paper table.
Load the paper with the print side facing down. The stack
must not be higher than the indicator line (maximum of 3000
sheets).
When a certain volume of paper is loaded, the paper table
automatically goes down slightly and stops. Repeat this
operation in the same way to load paper.
To Next Page
Loading...
Need help?
General
