1-120
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
SUPPLIES
The finisher (100-sheet stapling) requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge × three cartridges)
MX-SCX2
REPLACING THE CARTRIDGE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
1
Open the front cover.
2
Squeeze the green parts of the staple
case and pull the case up and then
out.
To Next Page
Loading...
