7-10
SYSTEM SETTINGS►SETTING MODE LIST
Auto Selection Setting of Tray that is Supplied the
Paper
Disabled
No Yes
Disabling Registration of Custom Image Disabled No Yes
Disabling sending while copying Disabled No Yes
High Quality Scan from Document Feeder (B/W) Disabled No Yes
Quick Scan from Document Glass (B/W) Disabled No Yes
Auto Clear Before Copy Execution Also Disabled No Yes
Initial Status Settings No Yes
Color Mode Full Color No Yes
Image Orientation Portrait No Yes
Paper Tray Varies depending on the machine
configuration
No Yes
Exposure Type Auto No Yes
• Copy of Copy Disabled No Yes
• Color Tone Enhancement Disabled No Yes
Copy Ratio 100% No Yes
• Select magnification automatically according to
paper size, when paper tray is selected.
Disabled
No Yes
2-Sided Copy 1-Sided→1-Sided No Yes
Original Binding Book No Yes
Output Binding Book No Yes
Output Auto No Yes
Output Tray Varies depending on the machine
configuration
No Yes
Offset Enabled No Yes
Separator Page No Yes
• Insert Before Job Disabled No Yes
• Insert After Job Disabled No Yes
Staple Sort*
1
1 Staple No Yes
Staple Position*
1
Left No Yes
Punch*
2
Disabled No Yes
Fold*
3,
*
4
Varies depending on the machine
configuration
No Yes
Saddle Fold*
3
No Yes
•Print Side Inside No Yes
• Fold Multiple Sheets Together Disabled No Yes
Paper Size for Z-Fold*
4
All Enabled No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
