Sharp MX-B201D

SHARP
USER PROGRAM
37
FAX MODE (Cont’d)
Program
Number
Program Name
Setting Codes
Description
12
SECURITY
SELECT
1: ON
2: OFF
Enable the polling security function.
13
FAX REMOTE
NUMBER
0-9 (5)
Set the 1-digit number used to activate remote fax
reception.
14
REMOTE
RECEPTION
1: ON
2: OFF
Enable the remote reception function.
15
FAX SIGNAL
RCV.
1: ON
2: OFF
Enable automatic fax reception when a fax tone is
heard after answering a call on an extension phone.
16
RCV. REDUCE
1: ON
2: OFF
When a fax is received that is larger than the
printing paper, enable reduction of the fax to the
size of the paper to avoid the fax being cut off.
17
BEEP LENGTH
1: 3 sec
2: 2 sec
3: NO BEEP
Set the length of the beep that sounds when fax
transmission or reception ends.
18
RINGER
VOLUME
1: OFF
2: LOW
3: MIDDLE
4: HIGH
Set the volume of the ringer.
19
BEEPER
VOLUME
1: OFF
2: LOW
3: MIDDLE
4: HIGH
Set the volume of the beep that sounds when a key
is pressed.
20
DIAL MODE
1: TONE
2: PULSE
Set the dial mode for the type of line you are on.
21
DISTINCTIVE
RING
1: OFF
2: STD
3: PATTERN 1
4: PATTERN 2
5: PATTERN 3
6: PATTERN 4
7: PATTERN 5
Set the ring pattern for distinctive ring.
22
INDEX PRINT
1: ON
2: OFF
Enable printing of a black mark (index) at the top of
each received fax page.
23
2-SIDED RX
1: ON
2: OFF
Print on both sides of the paper when a multi-page
fax is received.
24
TRAY
SELECTION
1: AUTO
2: TRAY 1
3: TRAY 2
Set the tray for printing received faxes.