2-6
COPIER
Contents
COPYING SEQUENCE
This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
Place the original.
Place the original in the automatic document feeder tray, or on the document glass.
Place the original in the automatic document feeder.
☞ PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER (page 1-37)
* Depending on the copy functions used, there are also cases where functions are selected before the original is placed.
Basic copy settings
Select the basic copy settings.
The main settings are as follows:
• Exposure and original type
☞CHANGING THE
EXPOSURE AND ORIGINAL IMAGE TYPE (page 2-23)
• Copy ratio
☞ REDUCTION/ENLARGEMENT/ZOOM
(page 2-25)
• Original size
☞ORIGINAL SIZES (page 2-29)
• Paper Settings
☞PAPER TRAYS (page 2-11)
2-sided copy settings
Select settings as needed for 2-sided copying and 2-sided
scanning of the original.
☞ AUTOMATIC 2-SIDED COPYING (page 2-17)
Special Modes
Plain
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%
A4
3.
2.
1.
A4
A5
Original
Paper Select
Auto
A4
Plain
Exposure
Auto
A4
4.
A4
OK
2-Sided Copy
To Next Page
Loading...
