Sharp MX-B382 User Manual

7-63
SYSTEM SETTINGS
Contents
Energy Save
The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce
pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings.
Toner Save Mode
You can reduce the amount of toner used for printing.
Auto Power Shut-Off
This setting enables or disables Auto Power Shut-Off.
Remove the checkmark if you prefer that Auto Power
Shut-Off does not operate.
When the set duration of time elapses after printing
ends, Auto Power Shut-Off activates and causes to
machine to go on standby at a minimal level of power
consumption.
This function reduces your power costs, and at the same
time helps conserve natural resources and reduce
pollution.
If you prefer that auto power shut-off activates as little as
possible, it is recommended that you try lengthening the
time setting after which activation takes place rather than
disabling the function altogether. (The time setting is
changed using "Auto Power Shut-Off Timer".)
Auto Power Shut-Off Timer
The time until Auto Power Shut-Off activates can be set
to any number of minutes from 1 to 240.
Select the time that best suits your workplace needs.
Preheat Mode Setting
The time until Preheat Mode activates can be set to any
number of minutes from 1 to 240.
Preheat Mode will activate when the set duration of time
elapses after printing ends and no further operations are
performed. This function reduces your power costs, and
at the same time helps conserve natural resources and
reduce pollution.
Select the time that best suits the needs of your
workplace.
[Print] in Toner Save Mode is only effective when the
machine's printer driver is not used. When the printer
driver is used, the printer driver setting takes
precedence.
This function may not operate in some applications
and operating systems.
Print
data
Print example
when "Toner
Save Mode"
is enabled
The timer setting will not be effective if Auto Power
Shut-Off is disabled using "Auto Power Shut-Off
".
Preheat mode cannot be disabled.

Sharp MX-B382 Specifications

General

Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	38 ppm
Copier resize	50 - 200 %
Maximum number of copies	999 copies
Time to first copy (black, normal)	8 s
Scan to	E-mail, File, FTP, Image, USB
Maximum scan area	A4 (210 x 297) mm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 600 DPI
Faxing	-
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax coding methods	JBIG, MH, MMR (Fax coding method), MR
Fax resolution (black)	203.2 x 97.8 DPI
Fax transmission speed	3 sec/page
Fax speed dialing (max numbers)	999
PCL fonts	80
Printer fonts	PCL, PostScript
Printing colors	Black
Stapling capacity	30 sheets
Maximum duty cycle	- pages per month
Number of PostScript fonts	136
Number of print cartridges	1
Page description languages	PCL 5e, PCL 6
Fonts included	Yes
Total input capacity	600 sheets
Total output capacity	280 sheets
Maximum input capacity	2100 sheets
Maximum print size	210 x 297 mm
Paper tray media types	Plain paper
Paper tray media weight	55 - 209 g/m²
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Display	LCD
Control type	Touch
Product color	Gray
Display diagonal	7 \
Market positioning	Business
Mobile printing technologies	Not supported
Supported network protocols (IPv4)	TCP/IP, IPX/SPX (NetWare), NetBEUI, EtherTalk (AppleTalk)
Supported network protocols (IPv6)	TCP/IP
Standard interfaces	Ethernet, USB 2.0
Maximum internal memory	1536 MB
Internal storage capacity	80 GB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	1840 W

Weight and Dimensions

Depth	493 mm
Width	560 mm
Height	714 mm