Sharp MX-B382 - Device Control

7-38
SYSTEM SETTINGS
Contents
Device Control
*1 MX-B382SC Only
*2 When a 500-sheet paper feed unit is installed.
*3 When a finisher is installed.
Item Factory default setting Page
■ Device Control
7-69
● Other Settings 7-69
X AB/Inch Type Setting AB (Inch) 7-69
X Default Original Size Settings Copy: None
Fax/Image Send: A4 (8-1/2" x 11")
Scan to HDD: A4 (8-1/2" x 11")
7-69
X Setting of Default Original Exit Place*
1
Upper Exit 7-69
X Original Feeding Mode All Disabled 7-69
X Auto Paper Selection Setting Plain Paper 7-69
X Detect Standard in Auto Colour Mode 3 7-69
X Optimization of a Hard Disk – 7-70
X Clear All Job Log Data – 7-70
● Disabling of Devices 7-71
X Disabling of Document Feeder Disabled 7-71
X Disabling of Duplex Disabled 7-71
X Disabling of Optional Paper Feed Unit*
2
Disabled 7-71
X Disabling of Tray Settings Disabled 7-71
X Disabling of Offset*
3
Disabled 7-71
X Disabling of Stapler*
3
Disabled 7-71
● Fusing Control Settings 60 - 89g/m
2
(16 - 23 lbs.) 7-71