7-39
SYSTEM SETTINGS
Contents
Copy Function Settings
Item Factory default setting Page
■ Copy Function Settings
7-72
● Initial Status Settings
7-72
X Paper Tray Tray 1
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output Auto
● Other Settings 7-73
X Copy Exposure Adjustment 5 7-73
X Add or Change Extra Preset Ratios – 7-73
X Setting a Maximum Number of Copies 999 7-73
X Initial Margin Shift Setting
7-73 Side 1 10 mm (1/2")
Side 2 10 mm (1/2")
X Erase Width Adjustment
7-73
Edge Clearance Width 10 mm (1/2")
X Card Shot Settings
7-73 Original Size X: 86 mm (3-3/8"), Y: 54 mm (2-1/8")
Fit to Page Disabled
X Disabling Deletion of Job Programs Disabled 7-73
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-73
X Disabling of Auto Paper Selection Disabled 7-73
X Auto Selection of Paper Tray that was Last Loaded Disabled 7-74
X 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-74
X Quick Scan from Document Glass Disabled 7-74
X Auto Clear Before Copy Job Execution Disabled 7-74
To Next Page
Loading...
