Sharp MX-B382 - Page 255

2-96
COPIER
Contents
3
MX-B382
MX-B382SC
Specify settings for 8 Business Cards
Layout.
(1) Select the desired layout from "Layout".
For the MX-B382SC, select the image orientation of the
original card from "Image Orientation".
(2) Touch the [OK] key.
You will return to the base screen of copy mode.
4
Press the [START] key.
Copying will begin.
To cancel scanning and copying...
Press the [STOP] key ( ).
• For the MX-B382, the "2-Sided to 2-Sided", "2-Sided to 1-Sided" and "1-Sided to 2-Sided" modes of automatic 2-sided
copying cannot be used.
For the MX-B382SC, the "2-Sided to 2-Sided" and "1-Sided to 2-Sided" modes of automatic 2-sided copying cannot be
used.
• The following functions and paper cannot be used.
- Zoom function
- Auto Image
- Label
To cancel the 8 Business Cards Layout setting...
Touch the [Cancel] key in the screen of step 3.
System Settings (Administrator): Business Card Scan Option (MX-B382 Only)
Specify whether or not the Business Card Scan function is used.
Special Modes
OK
OK
Cancel
Bus. Card Scan
Install Business card tray, and then set
business card, when using the documnet feeder
Layout
A4/8½x11
1-Sheet
Layout
8-Sheet
Layout
(2)(1)
Special Modes
OK
OK
Cancel
8 Business Cards Layout
Install Business card tray, and then set
business card, when using the documnet feeder
Layout Image Orientation
(2)(1)