Sharp MX-B382 - Page 393

4-49
FACSIMILE
Contents
3
MX-B382:
Specify the scan size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
MX-B382SC:
Specify the scan size.
(1) Touch the original output destination.
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum length that can be scanned is 500 mm (19-5/8") (the maximum height is 216 mm (8-1/2")).
• To specify an Inch size for the scan size, touch the [AB Inch] key to highlight the [Inch] side and then specify the
scan size.
MX-B382SC Only
• In the situations below, the original exit place is fixed to the heavy exit.
- When "Card Size" is selected
- When the original guide is set to 74 mm (2-7/8") or lower (Except when "Check Size" is selected)
- When the automatic document feeder is scanning an original with an X (horizontal) value of 105 mm (4-1/8") or
less
• When "Card Size" is selected, you cannot scan originals if the original guide is set to 74 mm (2-7/8") or higher.
216x340
A4
16K
216x340B5
Fax/Original
216x343
A5
Long Size
OK
AB
Inch
Size Input
(2)(1)
8½x13
5½x8½
216x330
216x340
216x343
A4
A5
Check Size
Heavy Exit
Upper ExitUpper Exit
Card Size
Original Exit
Place
Original Size
Fax/Original
AB
Inch
B5
Size Input
16K
Long Size
OK
8½x13
5½x8½
Upper Exit
216x330
216x340
216x343
A4
A5
B5
16K
Check Size
Heavy Exit
Upper Exit
Original Exit
Original Size
Fax/Original
AB
Inch
Long Size
OK
Place
Card SizeSize Input
(3)
(2)
(1)