Sharp MX-B382 - Page 552

5-75
SCANNER/INTERNET FAX
Contents
(11) [Mixed Size Original] key
☞ SCANNING ORIGINALS OF DIFFERENT SIZES
(Mixed Size Original) (page 5-88)
(12) [Original Count] key
☞ CHECKING THE NUMBER OF SCANNED
ORIGINAL SHEETS BEFORE TRANSMISSION
(Original Count) (page 5-93)
(13) [Drop Out Colour] key
☞ SCAN THE ORIGINAL DELETING THE
COLOURED PORTIONS (Drop Out Colour) (page
5-98)
(14) [Blank Page Skip] key
☞ ELIMINATING BLANK PAGES FROM A
TRANSMISSION (Blank Page Skip) (page 5-95)
*1 Does not appear in USB memory mode.
*2 Does not appear in data entry mode.
*3 MX-B382 Only
The optional business card feeder must be attached and "Business Card Scan Option" must be enabled in the
system settings (administrator).
Internet fax mode
The keys explained below can only be used in Internet fax mode. The other keys are the same as those explained in
"
Scan mode, USB memory mode, Data entry mode" (page 5-74).
(1) [Transaction Report] key
☞ CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT (Transaction Report)
(page 5-102)
[OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as
follows:
(A) Enter the selected special mode setting and return to the base screen.
(B) Enter the selected special mode setting and return to the special mode menu screen. Touch this key when you wish
to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the special mode menu screen without saving the
settings. When settings have been completed, this cancels the settings and returns you to the special mode menu
screen.
Internet Fax/Special Modes
Card Shot
OK
Slow Scan
Mode
Quick File
Erase
Job
Build
File
Transaction
Report
Program
Timer
Business
Card Scan
(1)
MX-B382:
Internet Fax/Special Modes
Card Shot
OK
Quick File
Erase
Job
Build
Transaction
Report
Program
Timer
File
Original
Count
Slow Scan
Mode
Mixed Size
Original
(1)
MX-B382SC:
Special modes can generally be combined with other special modes, however, there are some combinations that are not
possible. If a prohibited combination is selected, a message will appear in the touch panel.
Scan/Special Modes
Erase
Edge
Erase
Side Erase
Edge
Cancel
OK
OK
10
(0~20)
mm
(C)
(A)
(B)