7-8
SYSTEM SETTINGS
Contents
Fax Data Receive/Forward
* When the Internet fax expansion kit is installed.
Printer Condition Settings
* When a finisher is installed.
Item Factory default setting Page
■ Fax Data Receive/Forward
7-25
● I-Fax Settings*
7-25
X Reception Start –
X Manual Reception Key in Initial Screen Enabled
X Forward Received Data –
Item Factory default setting Page
■ Printer Condition Settings
7-26
● Printer Default Settings
7-26
X Copies 1
X Orientation Portrait
X Default Paper Size A4 (8-1/2" x 11")
X Default Paper Type Plain Paper
X Initial Resolution Setting 600dpi (High Quality)
X Disable Blank Page Print Disabled
X Line Thickness 5
X 2-Sided Print 1-Sided
X N-Up Print 1-Up
X Fit To Page Enabled
X Output
Print per Unit Enabled
Staple* Disabled
X Quick File Disabled
● PCL Settings
7-27
X PCL Symbol Set Setting PC-8
X PCL Font Setting Internal Font, 0: Courier
X PCL Line Feed Code 0.CR=CR; LF=LF; FF=FF
X Wide A4 Disabled
● PostScript Setting
7-28X Print PS Errors Disabled
X Binary Processing Disabled
To Next Page
Loading...
