Sharp MX-B382 - Page 771

7-108
SYSTEM SETTINGS
Contents
* This function is not available in some countries and regions.
 Transaction Report Print Select Setting
7-110
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
• Confidential Reception Print Out Notice Page
 Activity Report Print Select Setting
7-110• Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
 ECM Enabled 7-110
 Distinctive Ring Detection* Off 7-110
 PBX Setting* Disabled 7-110
X Fax Send Settings 7-111
 Rotation Sending Setting All Enabled 7-111
 Quick On Line Sending Enabled 7-111
 Printing Page Number at Receiver Enabled 7-111
 Date/Own Number Print Position Setting Outside the Original Image 7-111
 Recall in Case of Line Busy See "Country Differentiation Table"
(page 7-112).
7-112
 Recall in Case of Communication Error See "Country Differentiation Table"
(page 7-112).
7-112
X Fax Receive Settings 7-113
 Number of Calls in Auto Reception 2 7-113
 Switching from Manual to Automatic Reception* Disabled 7-113
 Duplex Reception Setting Disabled 7-113
 Auto Receive Reduce Setting Enabled 7-113
 Print Style Setting Auto Size Select 7-113
 Set the Telephone Number for Data Forwarding – 7-113
 Letter Size RX Reduce Print* Disabled 7-113
 Receiving Date & Time Print Disabled 7-114
 Fax Output Settings Number of Prints: 1 7-114
X Allow/Reject Number Setting All disabled 7-114
X Fax Polling Security Enabled 7-114
Item Factory default setting Page