Sharp MX-B467P - Loading Paper and Media; Paper Handling and Tray Management

Loading paper and specialty media
Setting the paper size and type
1 From the control panel, navigate to:
Settings >
> Paper > > Tray Configuration > > Paper Size/Type > > select a paper source
2 Set the paper size and type.
Configuring Universal paper settings
1 From the control panel, navigate to:
Settings >
> Paper > > Media Configuration > > Universal Setup >
2 Configure the settings.
Loading trays
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
1 Remove the tray.
Note: To avoid paper jams, do not remove trays while the printer is busy.
Loading paper and specialty media 12