Maintaining the printer
Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and
supplies, may cause damage to your printer.
Networking
Connecting the printer to a Wi‑Fi network
Make sure that Active Adapter is set to Auto. From the control panel, navigate to Settings > >
Network/Ports >
> Network Overview > > Active Adapter > > Auto >
1 From the control panel, navigate to:
Settings >
> Network/Ports > > Wireless > > Setup On Printer Panel > > Choose Network
>
2 Select a Wi‑Fi network, and then type the network password.
Note: For Wi‑Fi‑network‑ready printer models, a prompt for Wi‑Fi network setup appears during initial
setup.
Connecting the printer to a wireless network using Wi‑Fi Protected Setup
(WPS)
Before you begin, make sure that:
• The access point (wireless router) is WPS‑certified or WPS‑compatible. For more information, see the
documentation that came with your access point.
• A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
• Make sure that Active Adapter is set to Auto. From the control panel, navigate to:
Settings >
> Network/Ports > > Network Overview > > Active Adapter > > Auto >
Using the Push Button method
1
From the control panel, navigate to:
Settings >
> Network/Ports > > Wireless > > Wi‑Fi Protected Setup > > Start Push
Button Method >
2 Follow the instructions on the display.
Maintaining the printer 60
To Next Page
Loading...
Need help?
General
