EasyManuals Logo

Sharp MX-B468P User Manual

Sharp MX-B468P
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
8 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of
fire
or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
9 Turn on the printer.
Installing MarkNet N8450 Wireless Print Server
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
1 Turn o the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Using a flathead screwdriver, remove the cover for the wireless print server port.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.
4 Unpack the wireless print server.
Set up, install, and configure 36

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MX-B468P and is the answer not in the manual?

Sharp MX-B468P Specifications

General IconGeneral
BrandSharp
ModelMX-B468P
CategoryPrinter
LanguageEnglish

Related product manuals