Learn about the printer
Printer configurations
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, contact the place where you purchased the printer.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
You can configure your printer by adding up to three optional 250‑ or 550‑sheet trays. For more information,
see
“Installing optional trays” on page 26.
1 Standard bin
2 Control panel
3 Multipurpose feeder
4 Standard 250- or 550-sheet tray
5 Optional 250- or 550-sheet tray
Learn about the printer 8
To Next Page
Loading...
