Menu item Description
Security Reset Jumper
Enable “Guest” access*
No
Eect
Specify user access to the printer.
Notes:
• Enable "Guest" access allows for device recovery if the admin password
is lost. If this issue occurs, then contact customer support.
• No eect prevents using the security jumper for device recovery.
• This menu item appears only when an actual security jumper hardware is
installed.
Use Intelligent Storage Drive for
User Data
O
On*
Enable intelligent storage drive to store user data.
Note: This menu item appears only when an intelligent storage drive is
installed.
Minimum Password Length
0–32 (0*)
Specify the password length.
Enable Password/PIN Reveal
O*
On
Show the password or personal identification number.
Note: An asterisk (*) next to a value indicates the factory default setting.
Reports
Menu Settings Page
Menu item Description
Menu Settings Page Print a report that contains the printer menus.
Device
Menu item Description
Device Information Print a report that contains information about the printer.
Device Statistics Print a report about printer usage and supply status.
Profiles List Print a list of profiles that are stored in the printer.
Asset Report Print a diagnostic tool for print problems.
Note: To avoid clipping the content, print the report on letter‑ or A4‑size
paper.
Use printer menus 88
To Next Page
Loading...
Need help?
General
