Sharp MX-C300F User Manual

MX-C250 SIMULATION 6 – 47
Operation/Procedure
1) Set the original on the original table.
2) Select an item to be set with Arrow keys.
3) Press [OK]/[START] key
When [START] key is pressed, the adjustment value is set and
the scanned document image is outputted.
46-43
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(Super Fine)
Section
Operation/Procedure
1) Set the original on the original table.
2) Select an item to be set with Arrow keys.
3) Press [OK]/[START] key
When [START] key is pressed, the adjustment value is set and
the scanned document image is outputted.
46-51
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the gamma for the copy
mode heavy paper mode and the image
process mode. (Manual adjustment)
Section
Operation/Procedure
1) Select a target adjustment mode with 10keys.
2) Select an adjustment target color with [OK]/[START] key.
3) Select a target adjustment density level with Arrow keys.
4) Enter the set value with 10 keys.
5) Press [OK]/[START] key
When COPY key is pressed, the adjustment pattern is printed.
When the image density is insufficient or a background copy is
made in heavy paper copy, change this adjustment value to adjust
the image density.
46-52
Purpose
Adjustment/Setup
Function (Purpose)
Used to reset the copy color balance
adjustment (adjustment for each dither) to
the default value.
Section
Operation/Procedure
1) Select an item to be reset to the default (for each dither) with 10
keys.
To reset the adjustment values of all the items, select [ALL].
2) Press [OK]/[START] key
46-54
Purpose
Adjustment
Function (Purpose)
Used to reset the copy color balance
adjustment (auto adjustment for each
dither).
Section
Operation/Procedure
The color balance, the density, and the gradation are adjusted for
the monochrome mode, the heavy paper mode, the text, and the
line image edges.
This simulation is used to improve image quality in these modes
and images.
1) Press [OK]/[START] key. (A4 or 11" x 8.5" paper is automatically
selected.) The color patch image (adjustment pattern) is printed.
2) Set the color patch image (adjustment pattern) printed in the
procedure 1) on the document table so that the thin lines on the
printed color patch image (adjustment pattern) are on the left
side. Place 5 sheets of white paper on the printed color patch
image (adjustment pattern).
3) Press [OK]/[START] key.
The color balance adjustment is automatically performed.
Item/Display Content
Setting
range
Default
value
1AE(PHOTO ON)
Automatic expo-
sure value (Fine/
HT)
1 - 99 50
2 AE(PHOTP OFF)
Automatic expo-
sure value (Fine)
1 - 99 50
3 MANUAL(PHOTO ON)
Manual exposure
value (Fine/HT)
1 - 99 50
4
MANUAL(PHOTO
OFF)
Manual exposure
value (Fine)
1 - 99 50
Item/Display Content
Setting
range
Default
value
1AE(PHOTO ON)
Automatic expo-
sure value (Super
fine/HT)
1 - 99 50
2 AE(PHOTP OFF)
Automatic expo-
sure value (Super
fine)
1 - 99 50
3 MANUAL(PHOTO ON)
Manual exposure
value (Super fine/
HT)
1 - 99 50
4
MANUAL(PHOTO
OFF)
Manual exposure
value (Super fine)
1 - 99 50
Item Display Content
1 HEAVYPAPER K Copier heavy paper K
2 HEAVYPAPER C Copier heavy paper C
3 HEAVYPAPER M Copier heavy paper M
4 HEAVYPAPER Y Copier heavy paper Y
5 DITHER1 K Color error diffusion K
6 DITHER1 C Color error diffusion C
7 DITHER1 M Color error diffusion M
8 DITHER1 Y Color error diffusion Y
9 DITHER2 Monochrome error diffusion
10 DITHER3 Monochrome dither (600dpi)
Item/Display
Density level
(Point)
Setting range
Default
value
1 POINT1 Point 1 1 - 255 128
2 POINT2 Point 2 1 - 255 128
3 POINT3 Point 3 1 - 255 128
4 POINT4 Point 4 1 - 255 128
5 POINT5 Point 5 1 - 255 128
6 POINT6 Point 6 1 - 255 128
7 POINT7 Point 7 1 - 255 128
8 POINT8 Point 8 1 - 255 128
9 POINT9 Point 9 1 - 255 128
10 POINT10 Point 10 1 - 255 128
11 POINT11 Point 11 1 - 255 128
12 POINT12 Point 12 1 - 255 128
13 POINT13 Point 13 1 - 255 128
14 POINT14 Point 14 1 - 255 128
15 POINT15 Point 15 1 - 255 128
16 POINT16 Point 16 1 - 255 128
17 POINT17 Point 17 1 - 255 128
Select item (Mode/Image) Content
Dither
ALL All dither values
Heavy Paper Dither values for heavy paper
Color ED Dither values for color mode
B/W ED Dither values for the monochrome mode
B/W 600dpi
Dither values for the monochrome 600dpi
mode
Item Display Content

Sharp MX-C300F Specifications

General

Brand	Sharp
Model	MX-C300F
Category	All in One Printer
Language	English