76
TROUBLESHOOTING
REPLACING THE TONER
COLLECTION CONTAINER
This section explains the procedure for replacing the toner collection container.
The toner collection container collects any excess toner that occurs during printing. When the toner collection
container becomes full, the message "Replace waste box" will appear.
1
Pull out the paper tray 1.
Hold the tray with both hands and slowly pull out and up at a slight angle.
The toner collection container cannot be removed unless tray 1 is removed.
2
Open the front cover.
3
Pull out the toner collection container.
Hold the toner collection container with both hands and slowly pull it out.
4
Place the toner collection container on a flat surface.
Spread newspaper on the surface before placing the toner collection container.
• Do not throw the toner collection container into fire. Toner may fly out and cause burns.
• Store the toner collection container out of the reach of children.
When removing the toner collection container, it is easier to draw one side at a time.
• Do not tilt the part with the hole down, as waste toner will spill out.
• Do not discard the toner collection container. Place it in a plastic bag and store.
Your service technician will collect the toner collection container the next time he comes for maintenance.
Note
To Next Page
Loading...
Need help?
General
