99
WEB FUNCTIONS IN THE MACHINE
PCL Settings
PostScript settings
Item Selections Description
Symbol Set Select one of 35 sets. This specifies which country's characters (PCL symbol set)
are assigned to certain of the symbols in the character code
list.
The factory default setting is [PC-8].
Font Select one internal
font.
This specifies which PCL font to use for printing. One font can
be specified from among the internal fonts. The factory default
setting is [0: Courier].
Line Feed Code CR=CR; LF=LF;
FF=FF,
CR=CR+LF; LF=LF;
FF=FF,
CR=CR; LF=CR+LF;
FF=CR+FF,
CR=CR+LF;
LF=CR+LF;
FF=CR+FF
This specifies the line break code by means of a combination
of the "CR" (return) code, "LF" (line break) code, and "FF"
(page break) code. The factory default setting is printing
based on the transmitted code. The setting can be changed by
selecting one of four combinations.
Item Settings Description
Print PS Errors Enable, Disable When this setting is enabled, an error description is printed
each time a PostScript error occurs.
To Next Page
Loading...
Need help?
General
