For Macintosh users
Note: Make sure that the printer is added to the computer. For more information, see “Adding printers to a
computer” on page 50.
1 Load an original document into the automatic document feeder or on the scanner glass.
2 From the computer, do either of the following:
• Open Image Capture.
• Open Printers & Scanners, and then select a printer. Click Scan > Open Scanner.
3 From the Scanner window, do one or more of the following:
• Select the location that you want to save the scanned document.
• Select the size of the original document.
• To scan from the ADF, select Document Feeder from the Scan Menu or enable Use Document Feeder.
• If necessary,
configure
the scan settings.
4 Click Scan.
Scanning to an FTP server
1 Load the original document into the ADF tray or on the scanner glass.
2 From the home screen, touch FTP, and then enter the needed information.
3 If necessary, configure other FTP settings.
4 Send the FTP job.
Creating an FTP shortcut
1 From the home screen, touch FTP.
2 Enter the FTP server address, and then touch .
3 Create a shortcut.
Scanning to a network folder
1 Load the document into the ADF tray or on the scanner glass.
2 From the home screen, touch Scan Center.
Note: The icon and name may have been changed. For more information, contact your administrator.
3 Do either of the following:
• Select a destination.
Note: For SFTP, set the port number to 22.
• Use a shortcut by touching , and then selecting the shortcut from the list.
4 Scan the document.
Scan 89
To Next Page
Loading...
Need help?
General
