Sharp MX-C402SC User Manual

1-63
BEFORE USING THE MACHINE
Contents
CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines or colored lines appear even after you have cleaned the document glass and automatic document feeder,
use the charger cleaner to clean the main charger.
1
Press the [POWER] key ( ) on the
operation panel to turn off the panel
power, and then switch the main power
switch to the off position.
2
Open the front cover and remove the toner
collection container.
☞ REPLACING THE TONER COLLECTION CONTAINER
(page 1-50)
3
Release the lock levers and open the
main charger cover.
☞
REPLACING THE DEVELOPER CARTRIDGE (page 1-53)
4
Remove the charger cleaner.
(1) Flip down the charger cleaner lock (A) in the
direction of the arrow, and lift the left end of
the charger cleaner.
(2) Move the charger cleaner to the left and pull
it out.
(A)
(1)
(2)

Sharp MX-C402SC Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Fax Resolution	203 x 98 dpi
Print Speed	40 ppm (black), 40 ppm (color)
Copy Speed	40 cpm (black), 40 cpm (color)