Sharp MX-C402SC User Manual

2-44
COPIER
Contents
ADDING MARGINS (Margin Shift)
This function is used to shift the copy image right, left, up or down to adjust the margin.
This is convenient when you wish to hole punch the copies.
Shifting the image to the right so the copies can be bound at the left edge with a string
1
1
Not using margin shift Using margin shift
The punch holes cut off
part of the image
The image is moved to
allow space for the holes
so the image is not cut off.
1
1
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
Place the original in the automatic document feeder.
☞ PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER (page 1-36)
After placing the original, specify the original size.
☞ ORIGINAL SIZES (page 2-30)
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the [Margin Shift] key.
☞ Special modes menu (1st screen) (page 2-41)
3
Set the margin shift.
(1) Touch the margin shift position.
Select one of the 4 positions.
(2) Set the amount of the margin shift with
.
0" to 1" (0 mm to 20 mm) can be entered.
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
Special Modes
OK
1/2
Margin Shift
Right Left
Up
Down
Side 1
(0~1)
inch
1/2
Side 2
(0~1)
inch
OKCancel
(1) (2) (3)

Sharp MX-C402SC Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Fax Resolution	203 x 98 dpi
Print Speed	40 ppm (black), 40 ppm (color)
Copy Speed	40 cpm (black), 40 cpm (color)