Sharp MX-C402SC

8-4
TROUBLESHOOTING
Contents
MAKING A COPY OF A NON-STANDARD SIZE
ORIGINAL
The procedure for making a copy of a payment slip or other non-standard size
original is explained below.
The "Centering" special mode of copy mode can be selected to position the copied
image in the center of the paper.
FREQUENTLY ASKED QUESTIONS
(1-14)
inch
8
X
Y
6
Original
Size Input
OK
OKCancel
(1-8 1/2)
inch
1 Place the originals. 2 Enter the original size.
From the base screen of copy mode,
touch [Original] then [Size Input].
If the X dimension (width) of the document is less than
3-1/4" (85 mm) or the Y dimension (height) is less than
2" (51 mm), place the original on the document glass.
When using the automatic document feeder, use "Slow
Scan Mode" for a thin original.