Sharp MX-C402SC

7-40
SYSTEM SETTINGS
Contents
Image Send Settings
X Enable USB Port Enabled 7-77
X USB Port Emulation Switching Auto 7-77
X Enable Network Port Enabled 7-77
X Network Port Emulation Switching Auto 7-77
X Port Switching Method Switch at End of Job 7-77
● Auto Color Calibration – 7-78
Item Factory default setting Page
■ Image Send Settings
7-79
● Operation Settings 7-79
X Other Settings 7-79
 Default Display Settings Scan (fax when fax option is installed)
7-79
• Hold settings for a while after scanning has been
completed
Disabled
• Switch Automatically to Copy Mode Screen Enabled
 Address Book Default Selection Tab Switch: ABC, Address Type: All 7-79
 Initial Resolution Setting
7-79
•Scan Apply the Resolution Set when
Stored: Disabled
200 X 200 dpi
• Internet Fax*
1
Apply the Resolution Set when
Stored: Disabled
200 X 100 dpi
•Fax*
2
Apply the Resolution Set when
Stored: Disabled
Standard
 Default Exposure Settings Auto
7-79• Original Image Type Text
• Moiré Reduction Disabled
 Must Input Next Address Key at Broadcast Setting Disabled 7-80
 Scan Complete Sound Setting Middle 7-80
 The Number of File Name/Subject/Body Keys Displayed
Setting
12
7-80
 The Number of Direct Address Keys Displayed Setting 10 7-80
 Disable Switching of Display Order Disabled 7-80
 Hold Setting for Received Data Print*
3
Disabled 7-80
 Erase Width Adjustment
7-80
• Edge Clearance Width 1/2"
Item Factory default setting Page