Sharp MX-C402SC

7-37
SYSTEM SETTINGS
Contents
*1 This cannot be set on the machine. Set this in the system settings in the Web pages.
*2 When the Internet fax expansion kit is installed.
*3 When the facsimile expansion kit is installed.
*4 When the application integration module is installed.
Device Control
● Remote Operation Settings
7-67
X Remote Software Operation
 Operational Authority Prohibited
 View Password Entry Screen Display in Both PC and MFP
X Operation from Specified PC
 Operational Authority Prohibited
 Hostname or IP Address of PC –
 View Password Entry Screen Display in Both PC and MFP
X Operation by User who Has Password
 Operational Authority Prohibited
 View Password Entry Screen Display in Both PC and MFP
Item Factory default setting Page
■ Device Control
7-68
● Other Settings 7-68
X AB/Inch Type Setting Inch 7-68
X Default Original Size Settings Copy: None
Fax/Image Send: 8-1/2" x 11"
Scan to HDD: 8-1/2" x 11"
7-68
X Setting of Default Original Exit Place Upper Exit 7-68
X Original Feeding Mode All Disabled 7-68
X Auto Paper Selection Setting Plain Paper 7-68
X Detect Standard in Auto Color Mode 3 7-68
X Registration Adjustment – 7-68
X Optimization of a Hard Disk – 7-69
X Clear All Job Log Data – 7-69
● Disabling of Devices 7-70
X Disabling of Document Feeder Disabled 7-70
X Disabling of Duplex Disabled 7-70
X Disabling of Optional Paper Feed Unit*
1
Disabled 7-70
X Disabling of Tray Settings Disabled 7-70
X Disabling of Offset*
2
Disabled 7-70
X Disabling of Stapler*
2
Disabled 7-70
Item Factory default setting Page