Sharp MX-C507F

Changing the fax resolution
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 Touch Resolution, and then adjust the setting.
4 Send the fax.
Adjusting the fax darkness
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 Touch Darkness, and then adjust the setting.
4 Send the fax.
Printing a fax log
1 From the home screen, touch Settings > Reports > Fax.
2 Touch Fax Job Log or Fax Call Log.
Blocking junk faxes
1 From the home screen, touch Settings > Fax
> Fax Setup > Fax Receive Settings > Admin Controls.
2 Set Block No Name Fax to On.
Holding faxes
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
2 Select a mode.
Forwarding a fax
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2 Touch Fax Forwarding > Forward.
3 Configure the Forward to and Confirmation E‑mail settings.
Faxing 50