Sharp MX-C507F

Menu item Description
Auto Center
Off*
On
Align the content at the center of the page.
Mirror Image
Off*
On
Create a mirror image of the original document.
Negative Image
Off*
On
Create a negative image of the original document.
Shadow Detail
‑4 to 4 (0*)
Adjust the shadow detail in the original document.
Scan Edge to Edge
Off*
On
Scan the original document from edge to edge.
Sharpness
1–5 (3*)
Adjust the sharpness of the scanned image.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item Description
Allow Color Copies
Off
On*
Print copies in color.
Allow Priority Copies
Off
On*
Interrupt a print job to make copies.
Custom Job Scanning
Off*
On
Set the printer to scan the first set of original documents using the specified
settings, and then scan the next set with the same or different settings.
Note: This menu item appears only when a hard disk is installed.
Allow Save as Shortcut
Off
On*
Save copy settings as a shortcut.
Adjust ADF Skew
Off
On*
Set the printer to adjust the skewed images from documents that are scanned
from the ADF.
Sample copy
Off*
On
Print a sample copy to check the quality before printing the remaining copies.
Note: This menu item appears only when a hard disk is installed.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 79