Sharp MX-C507P - European Community (EC) directives conformity; United Kingdom (UK) conformity; Radio interference notice

5028
244 paper jam messages
Diagnostics and troubleshooting
143
Error code
Description
Action
244.41
Paper fed from tray 4 remains detected at the
sensor (tray 4 pass ‑ through) or at the sensor (tray
4 trailing edge) after the printer is turned on.
See “Sensors (tray [x] trailing edge and pass-
through) static jam service check” on
page 144 .
244.42
Paper fed from tray 4 was detected earlier than
expected at the sensor (tray 4 pass-through) or at
the sensor (tray 4 trailing edge).
See “Sensors (tray [x] trailing edge and
pass ‑ through): Paper arrived too early
service check” on page 145 .
244.44
Paper fed from tray 4 cleared the sensor (tray 4
pass-through) or the sensor (tray 4 trailing edge)
earlier than expected.
See “Sensors (tray [x] trailing edge and pass-
through): Paper cleared too early service
check” on page 151 .
244.45
Paper fed from tray 4 cleared the sensor (tray 4
pass-through) or the sensor (tray 4 trailing edge)
later than expected.
See “Sensors (tray [x] trailing edge and pass-
through): Paper cleared too late service
check” on page 153 .
244.46
Paper fed from tray 4 was picked but it never
arrived at the sensor (tray 4 trailing edge).
See “Sensor (tray [x] pass-through): Tray [x]
failed to pick service check” on page 155 .
244.47
Paper fed from tray 4 never cleared the sensor
(tray 4 trailing edge).
See “Sensors (tray [x] trailing edge and
pass ‑ through): Paper failed to clear service
check” on page 158 .
244.48
Paper fed from tray 4 was detected later than
expected at the sensor (tray 4 pass-through) or at
the sensor (tray 4 trailing edge).
See “Sensors (tray [x] trailing edge and pass-
through): Paper arrived too late service
check” on page 160 .
244.84
Failed to pick last sheet of paper.
See “Tray actuator and spring service
check” on page 137 .
244.91
Paper remains detected at the sensor (tray 4
pass ‑ through) or at the sensor (tray 4 trailing
edge) after the printer is turned on. Paper source
is undetermined.
See “Sensors (tray [x] trailing edge and pass-
through) static jam service check” on
page 144 .
244.92
Paper was detected earlier than expected at the
sensor (tray 4 pass-through) or at the sensor (tray
4 trailing edge). Paper source is undetermined.
See “Sensors (tray [x] trailing edge and
pass ‑ through): Paper arrived too early
service check” on page 145 .
244.94
Paper cleared the sensor (tray 4 pass-through) or
the sensor (tray 4 trailing edge) earlier than
expected. Paper source is undetermined.
See “Sensors (tray [x] trailing edge and pass-
through): Paper cleared too early service
check” on page 151 .
244.95
Paper cleared the sensor (tray 4 pass-through) or
the sensor (tray 4 trailing edge) later than
expected. Paper source is undetermined.
See “Sensors (tray [x] trailing edge and pass-
through): Paper cleared too late service
check” on page 153 .
244.96
Paper was picked but it never arrived at the
sensor (tray 4 trailing edge). Paper source is
undetermined.
See “Sensor (tray [x] pass-through): Tray [x]
failed to pick service check” on page 155 .
244.97
Paper never cleared the sensor (tray 4 trailing
edge). Paper source is undetermined.
See “Sensors (tray [x] trailing edge and
pass ‑ through): Paper failed to clear service
check” on page 158 .