Sharp MX-FX11

MX-FX11 FAX SOFTWARE SWITCH 2 – 21
116 1 Transmission Automatic reduced
transmission
In cases where the transmitted document size (width) is larger than the FAX
paper size (width) of the other party’s machine, this setting determines whether
to reduce the transmitted document or to cut off both edges.
"0": Transmit in reduced size
"1": Do not transmit in reduced size
FAX transmission
setting
2 Transmission Rotated transmission
selection (A4 → A4R)
Rotated transmission or not depending on orientation of the document.
When transmitting A4 document, this setting determines whether to transmit as
A3 width (A4) or to rotate the read image and transmit as A4 width (A4R).
"0": Rotate
"1": Do not rotate
FAX transmission
setting
3 Transmission Rotated transmission
selection (B5R → B5)
Rotated transmission or not depending on orientation of the document.
When transmitting B5R document, this setting determines whether to transmit
as A4 width (B5R) or to rotate the read image and transmit as B4 width (B5).
"0": Rotate
"1": Do not rotate
FAX transmission
setting
4 Transmission Rotated transmission
selection (A5R → A5)
Rotated transmission or not depending on orientation of the document.
When transmitting A5R document, this setting determines whether to transmit
as A4 width (A5R) or to rotate the read image and transmit as A4 width (A5).
"0": Rotate
"1": Do not rotate
FAX transmission
setting
5 Transmission Rotated transmission
selection
(8.5 x 11 → 8.5 x 11R)
Rotated transmission or not depending on orientation of the document.
When transmitting 8.5 x 11 (LTR) document, this setting determines whether to
transmit as A3 width (8.5 x 11) or to rotate the read image and transmit as A4
width (8.5 x 11R).
"0": Rotate
"1": Do not rotate
FAX transmission
setting
6 Transmission Rotated transmission
selection
(16K → 16KR)
Rotated transmission or not depending on orientation of the document
(16K A4).
When transmitting 16K document, this setting determines whether to transmit
as A3 width (16K) or to rotate the read image and transmit as A4 width (16KR).
"0": Rotate
"1": Do not rotate
FAX transmission
setting
7 Transmission Rotated transmission
selection (5.5 x 8.5R →
5.5 x 8.5)
Rotated transmission or not depending on orientation of the document
(INVOICE A5).
When transmitting 5.5 x 8.5R (INVOICE-R) document, this setting determines
whether to transmit as A4 width (5.5 x 8.5R) or to rotate the read image and
transmit as A4 width (5.5 x 8.5).
"0": Rotate
"1": Do not rotate
FAX transmission
setting
8 Transmission Page number printing Setting to determine whether or not to apply the page number (page number/
total pages in cases of memory transmission) in the area for printing date and
source.
"0": Apply
"1": Do not apply
FAX transmission
setting
117 1 Transmission Designation of date
and source printing
position
Set the position for applying the date and transmission source on the top of the
document when transmitting it.
"0": Outside of document (outside of send data)
"1": Inside of document (inside of send data)
FAX transmission
setting
2 Transmission Quick online/Memory
transmission
changeover (quick
online transmission)
Setting to determine whether to put transmission into the quick online
transmission mode or the memory transmission mode.
"0": Quick online transmission
"1": Memory transmission
FAX transmission
setting
3 Transmission Designation of date
and source printing
Set whether or not to apply the date and transmission source on the top of the
document when transmitting it.
"0": Apply
"1": Not apply
Not functionable in North America (always applied).
FAX transmission
setting
4 Transmission Re-call permitted when
busy
Set to re-call when the other party of a transmission is busy or does not call in.
"0": Prohibited
"1": Permitted
FAX transmission
setting
5-8 Transmission Number of re-calls
when busy
Set the number of re-calls to be made when the other party of a transmission is
busy or does not call in.
This can be set from 1 to 14 (Taiwan: 1 to 15, Australia/New Zealand/
Singapore: 1 to 9, U.K./France/Germany/Sweden/Russia/South Africa: 1 to 10,
Indonesia: 1 to 5, China: 1 to 3) times by binary inputting.
Number of recalls: Setting x once
The initial value is reverted to if a value outside of the setting range is set.
FAX transmission
setting
SW
No.
Bit
No.
Item SW selection and function System settings