Sharp MX-M266N

PRODUCT SPECIFICATION
SHARP
2
MX-M266N
MX-M316N
General Specification
Type:
Desktop
Original Paper Size:
Max. A3
Printed Paper Size:
Max. A3 – Min. A6R
Standard Paper Capacity:
2 x 500 + Bypass Tray (100) sheets (Total 1,100)
Maximum Paper Capacity:
4 x 500 + Bypass Tray (100) sheets (Total 2,100)
Paper Weight:
56-105 g/m
2
(Bypass 56-200 g/m
2
)
Output Capacity:
500 sheets (Centre), 100 sheets with Opt: MX-TR17 (& MX-FN26)
Off set Shifter
Yes
Warm-up Time:
20 sec.
Operation Panel:
7 inch W-VGA colour
Resolution (Equivalent):
600 x 600, 1200 x 600 dpi (Printer only)
Memory:
SD Card: 4GB, ICU: 2GB, Opt: 250GB HDD MX-HD14
Duplex:
STD (56-105 g/m
2
)
Dimensions (WDH):
620 x 617 x 830mm
Weight:
Approx. 51kg
Average Monthly Volume:
10-30K, Max 50K
20-50K, Max 75K
Environmental
Power Consumption:
Max. 1.45Kw
TEC Value (Measured):
1.8 kWh
2.1 kWh
Sound Power Level (Noise):
Operating: 72db (FAST), 30db (Standby)
Copier Specification
Copy Speed (Max.):
26 ppm (A4), 15 ppm (A3)
31 ppm (A4), 17 ppm (A3)
E-Sort:
Yes
First Copy Time (OC/RSPF):
4.3sec. / 7.0sec
Continuous Copy:
Max. 999
Scan Resolution:
600 x 600 dpi
Zoom Range:
25 – 400 % with 10 preset ratios (50 – 200% using RSPF)
Document Feeder
STD
Original capacity:
100 sheets
Original replacement speed:
56 opm (Copy/Fax/Scan)
PCL Printer
Max Print Speed (A4):
26 ppm (A4), 15 ppm (A3)
31 ppm (A4), 17 ppm (A3)
PDL (Emulation):
STD: PCL6, Opt: Postscript 3 [MX-PK11]
Interface:
USB 2.0, 10Base-T, 100Base-TX, 1000Base-T
Protocol:
TCP/IP (IPv4, IPv6), IPX/SPX (Netware), Ethertalk (Appletalk)
Memory:
256MB (STD & MAX)
Supported OS:
Windows® Vista*, Windows® 7*, Windows® 8*, Windows® 8.1*,
Windows® Server 2003* / 2008* / 2008R2 / 2012 / 2012R2 (*32/64bit).
Mac OSX 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.x, 10.9.x, 10.10.x (with MX-PK11)
Bundled Utility Software:
Status Monitor
Tandem Print:
Opt: MX-HD14 is required.
Airprint Support:
Supported using Third Party Solution only.
Sharpdesk Mobile:
Supported (via Wireless Access Point or MX-EB13).
Opt: MX-HD14 & MX-PK11 required for full functionality