Sharp MX-M266N

SHARP
TROUBLE CODES
31
A0
01
PCU ROM abnormality
02
SCU ROM abnormality
15
Incompatible DSK Boot and program
firmware version
17
UI data & CPU firmware inconsistency.
20
Firmware & EEPROM conflict (MFP)
21
Firmware & EEPROM conflict (PCU)
22
Firmware & EEPROM conflict (SCU)
CE
00
Network communication error
01
Network card is not installed or defective
02
FTP or Mail server is not found
03
Specified server does not correspond
during transmission
04
Invalid account/password (FTP server)
05
Invalid directory entered (FTP server)
06
Specified mail server (POP3) is not found
07
Invalid server account or password
08
Specified mail server (POP3) suspends
response
E7
01
MFP image data trouble.
03
HDD trouble.
04
HDD-ASIC error.
07
SD Card error
10
Shading trouble (Black correction).
11
Shading trouble (White correction).
14
CCD-ASIC communication error.
20
LSU laser detection error (Black).
21
LSU LD deterioration trouble.
28
LSU control ASIC connection error.
49
Watermark data error
50
Firmware & PWB combination error
60
MFP combination error (Firmware/PWB)
61
MFP-PCU combination error
62
MFP-SCU combination error
65
MFP EEPROM sum check error
80
MFP-SCU communication trouble.
90
MFP-PCU communication trouble.
91
Fax reception image data error
92
Copy image data error
93
Copy, Image send, Filing, Print image data
process error.
94
Image file data process error (when
importing filing data).
E7
96
MFP PWB DIMM memory check error.
EE
EL
Auto DV adjustment trouble (over toned).
EU
Auto DV adjustment trouble (under toned).
F1
00
Finisher - PCU PWB communication error
03
Finisher paper exit roller lifting trouble
10
Staple motor trouble
15
Finisher paper exit tray lift trouble
19
Finisher alignment operation trouble F
20
Finisher alignment operation trouble R
29
Finisher cooling fan motor abnormality
37
Finisher data backup RAM error.
50
Finisher incompatibility trouble.
95
Paper exit option configuration error
F2
39
Process temperature sensor trouble
40
Toner density sensor trouble
58
Temperature/humidity sensor trouble
64
Toner supply operation trouble
70
Improper toner cartridge detection
74
Toner cartridge CRUM error
F3
12
Paper feed tray 1 lift up trouble
22
Paper feed tray 2 lift up trouble
32
Paper feed tray 3 lift up trouble
42
Paper feed tray 4 lift up trouble
F6
00
MFP-Fax communication trouble
01
Fax EEPROM read/write error.
04
Fax modem operation trouble.
21
LIU & Fax soft switch error (combination)
30
Access error to 1-chip on Fax board.
97
Fax PWB compatibility trouble.
98
Improper Fax & Destination information.
H2
00
Thermistor open trouble (TH_UM)
01
Thermistor open trouble (TH_US)