7-37
SYSTEM SETTINGS
* When the hard disk drive is installed.
Image Send Settings
l
Interface Settings 7-78
Hexadecimal Dump Mode* Disabled 7-78
I/O Timeout 60 sec. 7-78
Enable USB Port Enabled 7-78
USB Port Emulation Switching Auto 7-78
Enable Network Port Enabled 7-78
Network Port Emulation Switching Auto 7-78
Port Switching Method Switch at End of Job 7-78
Item Factory default setting Page
n Image Send Settings
7-79
l
Operation Settings 7-79
Other Settings 7-79
Default Display Settings Scan (fax when fax is installed)
7-79
• Hold settings for a while after scanning has been
completed
Disabled
Address Book Default Selection Tab Switch: ABC, Address Type: All 7-79
Image Orientation Portrait 7-79
Initial Resolution Setting
7-79
•Scan Apply the Resolution Set when
Stored: Disabled
200 X 200 dpi
• Internet Fax*
1
Apply the Resolution Set when
Stored: Disabled
200 X 100 dpi
•Fax*
2
Apply the Resolution Set when
Stored: Disabled
Standard
Default Exposure Settings Auto
7-79• Original Image Type Text
• Moiré Reduction Disabled
Must Input Next Address Key at Broadcast Setting Disabled 7-80
Scan Complete Sound Setting Middle 7-80
The Number of File Name/Subject/Body Keys Displayed
Setting
12
7-80
The Number of Direct Address Keys Displayed Setting 10 7-80
Disable Switching of Display Order Disabled 7-80
Hold Setting for Received Data Print Disabled 7-80
Default Verification Stamp Disabled 7-80
Item Factory default setting Page
To Next Page
Loading...
