7-45
SYSTEM SETTINGS
*1 When a paper tray is installed.
*2 When a finisher is installed.
*3 When the hard disk drive is installed.
*4 When network connection is enabled.
*5 When the Internet fax expansion kit is installed.
*6 When the facsimile expansion kit is installed.
Change Administrator Password
l
Image Send Settings 7-96
Other Disabling 7-96
Disable Switching of Display Order Disabled 7-96
Disable Scan Function
7-96•PC Scan Disabled
• USB Memory Scan Disabled
Settings to Disable Registration 7-96
Disable Registering Destination from Operation Panel All disabled 7-96
Disable Registering Destination on Web Page*
4
All disabled 7-96
Disable Registration of Program All disabled 7-96
Disable Registration of Memory Box All disabled 7-96
Disable Destination Registration Using Global Address
Search*
4
All disabled
7-97
Disable Registration Using Network Scanner Tools*
4
Disabled 7-97
Settings to Disable Transmission 7-97
Disable [Resend] on Image Send Mode Disabled 7-97
Disable Selection from Address Book All disabled 7-97
Disable Direct Entry All disabled 7-97
Disable PC-I-Fax Transmission*
5
Disabled 7-97
Disable PC-Fax Transmission*
6
Disabled 7-97
l
Document Filing Settings*
3
7-97
Disable Stamp for Reprinting Disabled 7-97
Batch Print Settings
7-97
Selection of [All Users] is not allowed. Enabled
Selection of [User Unknown] is not allowed. Enabled
Item Factory default setting Page
n Change Administrator Password
See "TO THE ADMINISTRATOR OF
THE MACHINE" in the Start Guide.
7-98
Item Factory default setting Page
To Next Page
Loading...
