Sharp MX-M314N User Manual

1-14
BEFORE USING THE MACHINE
Contents
TURNING THE POWER ON AND OFF
The machine has two power switches. The main power switch is on the left side at the rear. The other power switch is
the [POWER] key ( ) on the operation panel at the top right.
Main power switch
When the main power switch is switched on, the main
power indicator on the operation panel lights up.
[POWER] key
Turning on the power
(1) Switch the main power switch to the "on"
position.
(2) Press the [POWER] key ( ) to turn on the
power.
Turning off the power
(1) Press the [POWER] key ( ) to turn off the
power.
(2) Switch the main power switch to the "off"
position.
Restarting the machine
In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the [POWER] key ( ) to turn off the power
and then press the key again to turn the power back on.
"Off" position
"On" position
Main power indicator
[POWER] key
• If the main power indicator is flashing, wait until it lights steadily and then press the [POWER] key.
• When turning off the main power switch, ensure that each of the lamps on the operation panel has been turned off.
• In the event that the main power is suddenly interrupted due to a power failure or other reason, turn the machine power
back on and then turn it off in the correct order. If the machine is left for a long time with the main power having been
turned off prior to the [POWER] key ( ), abnormal noises, degraded image quality, and other problems may result.
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking
may damage the hard drive and cause data to be lost.
• Switch off both the [POWER] key ( ) and the main power switch and unplug the power cord if you suspect a machine
failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
• When a print job is received, the main power indicator will flash. After the print job data is received and printing starts, the
print data indicator lights up.
• When using the fax or Internet fax function, always keep the main power switch in the "on" position.
In some states of the machine, pressing the [POWER] key ( ) to restart will not make the settings take effect. In this case,
use the main power switch to switch the power off and then on.

Sharp MX-M314N Specifications

General

Print Technology	Laser
Print Speed	31 ppm
Standard Paper Capacity	1100 sheets
Duplex Printing	Yes
Max Scan Resolution	600 x 600 dpi
Copy Speed	31 cpm
Max Copy Resolution	600 x 600 dpi
Fax Capability	Optional
Network Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Warm-up Time	20 seconds
Fax Transmission Speed	33.6 Kbps
Max Paper Size	A3
Scanner Type	Color
Display	7-inch color touchscreen
Original Size	A3
Operating System Compatibility	Windows, Mac, Linux