Sharp MX-M314N User Manual

1-2
BEFORE USING THE MACHINE
Contents
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Job separator tray (Upper tray)*
Print jobs and received faxes are delivered to this tray.
(2) Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞ PLACING THE ORIGINAL (page 1-36)
(3) Front cover
Open this cover to switch the main power switch to "On"
or "Off" or to replace a toner cartridge.
☞ TURNING THE POWER ON AND OFF (page 1-14)
☞ REPLACING THE TONER CARTRIDGES (page
1-51)
(4) Output tray (center tray)
Output is delivered to this tray.
(5) Operation panel
This is used to select functions and enter the number of
copies.
☞ OPERATION PANEL (page 1-7)
(6) Exit tray unit (right tray)
*
When a finisher is installed, output can be delivered to
this tray.
(7) Finisher*
This can be used to staple output.
☞ FINISHER (page 1-42)
* Peripheral device.
BEFORE USING THE MACHINE
(2)(1)
(3)
(4)
(6) (7)
(5)
When a finisher is installed
When the output tray unit is installed

Sharp MX-M314N Specifications

General

Print Technology	Laser
Print Speed	31 ppm
Standard Paper Capacity	1100 sheets
Duplex Printing	Yes
Max Scan Resolution	600 x 600 dpi
Copy Speed	31 cpm
Max Copy Resolution	600 x 600 dpi
Fax Capability	Optional
Network Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Warm-up Time	20 seconds
Fax Transmission Speed	33.6 Kbps
Max Paper Size	A3
Scanner Type	Color
Display	7-inch color touchscreen
Original Size	A3
Operating System Compatibility	Windows, Mac, Linux