Sharp MX-M550N

MX-M700N TRANSFER SECTION M – 3
3. Disassembly and assembly
A. Transfer section
(1) Transfer unit
1) Open the left door unit.
2) Loosen the blue screw and open the holder to remove the
transfer unit.
a. Transfer drive gear
1) Remove the transfer unit. (See “(1) Transfer unit”)
2) Loosen the blue screw and unhook the hook lever in order to
open the transfer belt unit in the arrowed direction.
3) Remove the spring.
4) Remove the transfer belt unit in the arrowed direction.
No. Unit No. Parts
Mainte
nance
(1) Transfer unit a Transfer drive gear ✕▲
bTransfer belt { ▲
c Transfer auxiliary roller
d Transfer roller ▲
e Transfer roller collar ✕▲
f Transfer cleaning roller
g Transfer cleaning brush
(1)-b
(1)-f
(1)-a
(1)-e
(1)-e
(1)-c
(1)-d
(1)-g
(1)
2
1