Sharp MX-M550N

MX-M700N TRANSFER SECTION M – 4
5) Remove the ground members.
6) Remove the blue screw to remove the roller fixing members.
7) Pull out the upper transfer roller unit from the transfer belt.
8) Remove the E-ring and screw to remove the transfer drive
gear.
b. Transfer belt
1) Remove the transfer unit. (See “(1) Transfer unit”)
2) Remove the transfer belt unit. (See “a. Transfer drive gear”)
3) Pull out the transfer belt.
c. Transfer auxiliary roller
d. Transfer roller
e. Transfer roller collar
1) Remove the transfer unit. (See “(1) Transfer unit”)
2) Remove the upper transfer roller unit.
(See “a. Transfer drive gear”)
3) Remove the transfer belt. (See “b. Transfer belt”)
4) Remove the transfer tension roller bearing to remove the
transfer roller.
5) Remove the E-ring to remove the transfer roller transfer roller
collar.