23
7
Remove the original and place the next original, and then press the [START] key
().
Repeat this step until all originals have been scanned.
For the second original and following originals, use the same [START] key ( ) as you did for the first original.
8
Touch the [Read-End] key.
To cancel scanning of the original and copying...
Press the [STOP] key ( ).
System Settings (Administrator): 2-Sided Copy
The default 2-sided copy mode can be changed.
Read-End
Place next original. Press [Start].
When finished, press [Read-End].
To Next Page
Loading...
