Sharp PA-3000 - Page 13

E SETTING PAGE FORMATS
‘ RETURN
CLRIND
CODE
o._.J
©
—~
{CODE
INSERTING AND MOVING THE PAPER
Insert the paper using the platen knob. Move it in the typewriter
quickly and easily using the INDEX UP or INDEX DOWN key.
To Insert the Paper:
1. Insert the paper so that it rests evenly against the paper
supporter.
2. Let the paper drop behind the platen until it stops.
3. Pull the bail bar toward you.
4. Turn the platen knob to move the paper forward. Once the paper
is partially inserted you can also use the RETURN key to position
the paper.
5. If the paper is uneven, push the paper release lever away from
you and straighten the edges. Pull the paper release lever toward
you to lock the paper.
6. Return the bail bar.
Points to Remember
e You can also insert the paper using the INDEX UP key.
To Move the Paper Up and Down:
Hold down the CODE key and press the number 9 (INDEX UP) key
to move the paper up one-half line.
Hold down the CODE key and press the number 0 (INDEX DOWN)
key to move the paper down one-half line.
Points to Remember
¢ |INDEX UP and INDEX DOWN operations cancel the Correction
Memory.